D - Configuration; Quick Configuration Wizard; Camera Configuration Page; Programme Page - THOMSON 512320 Manual De Usuario

d - CONFigurATiON

1 - QUICK CONFIGURATION WIZARD

When you switch on your device for the first time,
the configuration wizard is launched and you can set
up your device in just a few clicks.
If you want to disable the wizard the next time you
switch on your device, check the "Désactiver
l'assistant au prochain reboot" (Disable the
wizard at the next start-up) box.
Click on "Suivant" (Next) to start the quick
configuration wizard on your device.
1.1 - netWork page
Configure your recorder's network settings here.
Leaving the default settings on is recommended:
"DHCP" ticked, "UPNP" ticked. Click "Suivant"
(Next) to continue.
10
en
Plug and Play 4 channel colour
network video recorder

1.2 - camera configuration page

Cameras connected to the same network as the
recorder will appear here. To speed up detection,
click the "Attribution auto IP/Caméras" (Auto IP/
camera assignment) button. Click "Suivant" (Next)
to continue.
(Refer to paragraph 2.9 "Manual pairing of
cameras" for more details.)

1.3 - programme page

From here you can set weekly recordings for each of
the cameras, half hour by half hour for the entire week.
• The diagram on the screen shows the behaviour
pattern adopted for the entire week. The graduated
scale at the top of the diagram indicates the time on
the selected day (0 to 24). The letters on the left
indicate the corresponding day of the week:
"S" = Sunday, "M" = Monday, "T" = Tuesday, "W"
= Wednesday, "T" = Thursday, "F" = Friday, "S" =
Saturday. Permanent (normal) recording is activated
by default for the entire week: each half hour is
coloured green.