Interrupting Operation; Manual Time Entry - Amana HDC212 Manual Del Usuario

Operation
STYLE 2
Interrupting
Operation
Open oven door or press
STOP/RESET pad to
interrupt operation. Display
continues to show countdown time.
Close door and press START pad
to resume oven operation.
Canceling Mistakes
• If oven is not cooking, press
STOP/RESET pad to clear display.
• If oven is cooking, press
STOP/RESET pad once to stop
oven, then again to clear display.
• If oven door is open and time
shows in display, close oven
door and press STOP/RESET
pad to clear display.
X2 Pad
To increase cooking time
when cooking more than one serving.
1. Open oven door and place food
in oven. Close door.
• READY displays. Fan and
light will turn on.
2. Press X2 pad.
• Amount of time added is a
percentage of the original
preprogrammed cooking time.
• The percentage can be
changed. See Programming
section in this manual.
3. Press desired preprogrammed pad.
4. Oven begins cooking. Displayed
cooking time is the total of original
cooking time and added X2 time.

Manual Time Entry

To cook food using a specific entered time and power level.
1. Open oven door and place food in oven. Close door.
• READY displays. Fan and light will turn on.
2. Press TIME ENTRY pad.
• READY and 00:00 display.
• If pad does not work, open and close oven door and try
again.
3. Enter cooking time by using the numbered pads.
4. Press POWER LEVEL pad to change power level.
• COOK LEVEL displays with the power setting.
• If a number is not displayed with COOK LEVEL the
microwave is set to full power.
• Press a number pad to adjust power level to desired setting.
5. Press TIME ENTRY pad.
• Display changes to cook time and power level for the next stage.
6. Enter cook time and power level as in steps 3 and 4.
• To add another cooking stage press TIME ENTRY pad again.
• Up to four different stages can be programmed.
7. Press START pad.
• Oven operates and time counts down.
• POWER, COOK LEVEL and cooking time display.
Preprogrammed Pads
To cook food using pads preprogrammed with cooking
sequences.
1. Open oven door and place food in oven. Close door.
• READY displays. Fan and light will turn on.
2. Press desired pad.
• For single pad entry, press only one pad.
• For double pad entry, press the two pads, in order,
of the double digit number for the desired cooking
sequence.
• To change single or double pad entry option see
User Options section in this manual.
3. Oven begins to cook.
• POWER, COOK LEVEL and total cooking time display.
• For additional cooking time, press preprogrammed pad again
to begin cooking sequence again.
14
Factory Settings