Remote Control - Klip Xtreme UltraBoom Pro Manual

Control
This screen displays the selected input mode: Bluetooth
1. LCD display
Note: Remove the plastic protector film from LCD display before use
Connect your USB flash drive to play MP3 and WMA music files
2. USB port
Insert your SD
3. SD card slot
TM TM
Allows the selection and control of the available audio sources: AUX-in, Bluetooth
SD , USB and tuner. The mode symbol illuminates when the selected source is
TM
playing.
MODE: Press this button to cycle through the different audio sources. The default is
AUX-in mode.
:Plays and pauses the USB, SD
hold for 2 seconds to initiate the scanning of channels from the lowest up to the
highest frequency, and store them automatically as presets in the memory.
: Repeats the current playing USB or SD
4. Media panel (ALL)
1. Plays the previous Bluetooth
button will tune down to the previous channel when briefly pressed.
2. Press and hold this button to decrease the volume.
1. Plays the next Bluetooth
will tune up to the next channel when briefly pressed.
2. Press and hold this button to increase the volume.
: Scrolls through the different equalizer sound effects
EQ
Controls the overall audio level from all inputs. Turn it counterclockwise to lower
5. Master volume knob
the volume. A clockwise rotation will increase the volume level of the speaker
Increases or decreases the bass (low) frequencies of the speaker at a range between
6. Bass knob
-12dB to+12dB
Increases or decreases the treble (high) frequencies of the speaker at a range
7. Treble knob
between -12dB to +12dB
Adjust this knob to control how much of an echo effect is applied to the signal
8. Echo knob
from the wired microphones and the microphone inputs
Controls the audio level of both wired michrophones
9. Mic. volume knob
Controls the audio level of a guitar
10. Guitar volume knob
The VCV switch activates the microphone talk over feature. If enabled, it prioritazes
11. Voice Control Volume
the microphone by silencing music playback when there is an announcement through
(VCV) switch
microphone. When this switch is off, the speaker volume remains constant
Accepts the input from a wired microphone
12. Mic
Accepts the input from a guitar
13. Guitar
Connect an active (powered) speaker to RCA output, connect a CD, digital media
14. Mix out and Line
player, mixer or other media source to this RCA input connectors
in jacks
Connect a CD player, digital media player, a mobile phone or other audio source
15. Aux input
to this 3.5mm stereo line-in connector
16. Power switch Turns the power on and off
Plug the supplied power cable in this jack
17. AC input
Description
, USB, SD
® TM
card here to play MP3 and WMA music files
, or Bluetooth source. In tuner mode, press and
®
TM
track , repeat all of the tracks
(ONE)
TM
, USB or SD track. In tuner mode, this
® TM
, USB or SD track. In tuner mode, this button
® TM

Remote control

and tuner
In addition to the panel controls, an infrared remote control is included which provides additional
functions to allow greater control over the media player.
• To operate the remote control, remove the clear plastic tab to activate the battery.
® ,
• In order for the remote to operate properly, ensure that it is pointed toward the front of
the speaker.
Control
1. Power
2. Mode
3. Mute button
4.
5.
6.
7. -/+
8. EQ
9. U/SD
TM
10. RPT
11. Numbered keys
EQ
VoL-
VoL+
SCN
U/SD
RPT
Description
Toggles the media panel between active and standby mode
Press this button to cycle through the different audio sources:
, SD , USB and tuner
Bluetooth ® TM
Cancels the audio coming from the speaker. Press it again to unmute
the speaker
Plays the previous , USB or SD track. In tuner mode, this button
Bluetooth ® TM
will tune down to the previous channel when briefly pressed, or scan the dial
in a downward direction when held down longer
Plays the next , USB or SD track. In tuner mode, this button will
Bluetooth ® TM
tune up to the next channel when briefly pressed, or scan the dial in an
upward direction when held down longer
Plays and pauses the USB, SD , or
Bluetooth
TM ®
hold for 2 seconds to initiate the scanning of channels from the lowest up to
the highest frequency, and store them automatically as presets in the memory
Press these buttons to increase or decrease the master volume
Scrolls through the different equalizer sound effects
Switches the audio source between USB or SD
Repeats the current playing USB or SD track (ONE), repeat the tracks (ALL)
TM
In USB and SD modes, press any key from 0 to 9 on the remote to choose
TM
directly the tracks you want to play. In tuner mode, it allows the manual input
of frequencies
source. In tuner mode, press and
TM