Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Settings
Connection
GPRS Attach
If you select Power On and you are in a network that
supports packet data, the phone registers to the GPRS
network and sending short messages will be done via
GPRS. Also, starting an active packet data connection,
for example, to send and receive e-mail, is quicker. If
you select When Needed, the phone will use a packet
data connection only if you start an application or
action that needs it. The GPRS connection is closed
after it is not used by any application.
Note
n
If there is no GPRS coverage and you have chosen
Power on, the phone will periodically try to establish
a packet data connection.
Network Profile
This feature sets the Profile during the WAP and MMS
connections. Please see page 51 for further detail. The
Profile menu under the Access Point feature will
display Add, Delete and Editor options, but the reason
why Activate option is not available is because there is
no way of knowing whether WAP or MMS will be used
to activate the content.
78
Reset Network Profile
Menu 9.6
This allows Profile information to be restored to
(Menu 9.6.1)
original setting. For example, this option will restore
the Profile that has been deleted by the Delete All
selection from the Network Profile (Menu 5.4)
submenu.
Reset Default
You can easily reset your phone to its default
configuration. To do so, proceed, as follows.
1. Select the Reset Default menu option.
2. Enter the 4-digit phone password.
Note
n
The password is preset to 0000.
(Menu 9.6.2)
(Menu 9.6.3)
Menu 9.7
Capítulos
Tabla de contenido
