Tabla de contenido
Idiomas disponibles
Idiomas disponibles
]
Enable: You must enter the PIN each time the phone
is switched on.
]
Disable: The phone connects directly to the network
when you switch it on.
Auto Key Lock
When you enable Automatic key lock, keypad will be
lock automatically on an idle screen after selected
seconds without any key requesting. if you set to Off,
keypad will not be locked automatically.
Note I
n
f you want to unlock your phone keypad, press the
left soft key [Unlock] and then press the right soft
key. But if you enabled Automatic key lock before,
your phone keypad will be unlock and then after
selected seconds the keypad will be lock up again
automatically.
Fixed Dial Number
Allows you to restrict your outgoing calls to selected
phone numbers, if this function is supported by your
SmartChips. The PIN2 code is required.
The following options are available:
]
Enable: You can only call phone numbers stored in
the Address Book. You must enter your PIN2.
]
Disable: You can call any number.
]
Number List: You can view the number list saved as
fixed dial number.
(Menu 9.5.2)
Note
n
Not all SmartChips have a PIN2. If your SmartChips
does not, this menu option is not displayed.
Change Codes
The Change codes feature allows you to change your
current password to a new one. You must enter the
current password before you can specify a new one.
You can change the access codes: Security Code,
PIN1 Code, PIN2 Code
Note
n
PIN: Personal Identification Number.
(Menu 9.5.3)
Settings
(Menu 9.5.4)
77
Capítulos
Tabla de contenido
