Settings; Units; Backlight; Automatic Shutdown - PCE CT 65 Manual De Instrucciones

5.2

Settings

5.2.1

Units

Press the "Select" key to enter the menu.
1.
Use the "Up" / "Down" keys to get to the submenu "Set".
2.
Press the "Select" key to enter the submenu.
3.
Press the "Up" / "Down" keys to get to the submenu "Unit".
4.
Press the "Select" key to select the submenu. 5.
Use the "Up" / "Down" keys to choose the desired unit.
6.
Press the "Select" key to confirm your choice.
7.
Press the "Back" key twice to return to measurement mode.
8.
5.2.2

Backlight

In the submenu "Backlight", it is possible to adjust the brightness of the backlight.
Press the "Select" key to enter the menu.
1.
Use the "Up" / "Down" keys to get to the submenu "Set". 2.
Press the "Select" key to enter the submenu.
3.
Press the "Up" / "Down" keys to get to the submenu "Backlight".
4.
Press the "Select" key to select the submenu "Backlight".
5.
Use the "Up" / "Down" keys to set the desired brightness.
6.
When the brightness has been set correctly, press the "Back" key three times to
1.
return to measurement mode.
5.2.3

Automatic shutdown

The automatic shutdown can be deactivated in the related submenu. If it stays activated, the
coating thickness tester is automatically shut down off after three minutes of inactivity.
Press the "Select" key to enter the menu.
1.
Use the "Up" / "Down" keys to get to the submenu "Set".
2.
Press the "Select" key to enter the submenu.
3.
Press the "Up" / "Down" keys to get to the submenu "Auto-power-off".
4.
Press the "Select" key to select the submenu "Auto-power-off".
5.
Use the "Up" / "Down" keys to activate or deactivate the function.
6.
Press the "Select" key to confirm your choice.
7.
Press the "Back" key twice to return to measurement mode.
8.
5.2.4

Adjust the contrast

The LCD is influenced by temperatures and humidity when displaying measurements.
Therefore, it is possible to adjust grey scales.
Press the "Select" key to enter the menu.
1.
Use the "Up" / "Down" keys to get to the submenu "Set".
2.
Press the "Select" key to enter the settings.
3.
Press the "Up" / "Down" keys to get to the submenu "Contrast".
4.
Press the "Select" key to select the submenu.
5.
Use the "Up" / "Down" keys to adjust the grey scales.
6.
Press the "Select" key to confirm your choice.
7.
Press the "Back" key to return to measurement mode.
8.
© PCE Instruments