Electrolux EXI09HD1W Manual De Instrucciones página 4

on how to use and maintain your air conditioner
properly. Just a little preventive care on your part
can save you a great deal of time and money over
answers to common problems in the chart of
troubleshooting tips on page 20-21. If you review the
to call for service.
Meanings of symbols used in this manual are shown
below:
caution
This indicates information concerning your personal
safetyand how to avoid damaging the appliance.
tips and information
This symbol indicates tips and information about use
of the appliance.
environmental tip
This symbol indicates tips and information about
economical and ecological use of the appliance.
This symbol indicates never to do this.
Always do this.
1 Do not operate unit with horizontal louvre inclosed
position.
2
4
warning
If you notice an unusal situation, such
as a burning smell, please switch off
the power to the air conditioner and
contact an Electrolux service agent. If
this abnormal status continues the air
conditioner may be damaged or even
Do not operate the air conditioner with
wet hands. This may cause electric
shock.
Do not damage or cut off the power cord
or other wires. If this occurs, please have
it repaired or replaced by an accredited
technician
Do not connect this air conditioner to a
multi outlet powerboard.
Please switch off the power supply to
the air conditioner if it is not to be used
for an extended period. Otherwise, it will
Before cleaning the air conditioner,
please disconnect the power supply in
order to eliminate the possibility of electric
shock.
The power supply should be matched
with the air conditioner according to
the installation manual. Air conditioners
provided with a supply cord should be
connected directly to a power outlet with
a suitable safety switch. Air conditioners
that are hard wired must be connected to
a suitable safety circuit breaker according
to the installation manual.
Please ensure that the power supply to
the air conditioner is stable and meets the
requirements set out in the installation
manual.
Always ensure the product is installed
with appropriate earthing.
For safety, be sure to turn off the
circuit breaker before performing any
maintenance or cleaning or when the
product is not used for an extended
period of time. Accumulated dust may