Work Sharp WS2000 Guia Del Usuario página 7

www.worksharptools.com
ity. Inspect extension cords periodically
and replace if damaged. Keep unit dry,
clean and free from oil and grease.
• STORE IDLE TOOLS. When not in use,
tools should be stored in a dry, locked-
up place out of the reach of children.
• AVOID UNINTENTIONAL STARTING.
Make sure switch is in the "OFF" posi-
tion before plugging in.
• STAY ALERT. Watch what you are do-
ing, use common sense and do not oper-
ate the tool when you are tired or im-
paired.
• DON'T OVERREACH. Keep proper foot-
ing and balance at all times.
• NEVER STAND ON TOOL. Serious in-
jury could occur if the tool is tipped or
if the cutting tool is unintentionally con-
tacted.
• CHECK DAMAGED PARTS. Before
use of the tool, it should be carefully
checked to determine that it will oper-
ate properly and perform its intended
function. Check for alignment of moving
parts, binding of moving parts, break-
age of parts, mounting and any other
conditions that may affect its operation.
A guard or other part that is damaged
should be properly repaired or replaced
by an authorized service center unless
otherwise indicated in the instruction
manual. Have defective switches re-
placed by an authorized service center.
Do not use the tool if the switch does
not turn it on and off.
• INSPECT GRINDING WHEELS FOR
DAMAGE. Do not use tool if grinding
wheel is damaged as injury may occur.
• WARNING. The use of any accessory
or attachment other than one recom-
mended in this user's guide may present
a risk of personal injury.
• HAVE YOUR TOOL REPAIRED BY A
QUALIFIED PERSON. This electric tool
complies with applicable safety stan-
dards. Repairs should only be carried
out by qualified persons using original
spare parts; otherwise this may result
in considerable danger to the user.
• SAVE THESE INSTRUCTIONS AFTER
READING.
For Service Contact:
Professional Tool Manufacturing, LLC
WORK SHARP™
210 E. Hersey St.
Ashland, OR 97520
USA
Phone: 1-800-597-6170
FAX: 541-552-1377
Email: [email protected]
WARNING:
Work Sharp
Wheel is NOT intended for use on
the WS2000 model. Use ONLY the
Edge-Vision™ wheel on model
WS2000.
WARNING:
Some dust created by power sand-
ing, grinding, miscellaneous con-
struction activities, as well as
contents from the machine includ-
ing the molding, wiring, grind-
ing wheel, or any other parts may
contain chemicals known to the
State of California to cause cancer,
birth defects or other reproductive
harm and can be hazardous to your
health.
Tempered Glass
7