Unpacking And Assembly - Work Sharp WS2000 Guia Del Usuario

10
2 Unpacking and Assembling
1. Carefully remove the tool and the
accessories kit from the box.
2. The WORK SHARP™ WS2000
includes:
• WORK SHARP™ WS2000 unit
• Edge-Vision™ slotted wheel
(fig. 2-1)
• Top tool rest (fig. 2-2)
• Abrasives kit including standard
and slotted adhesive-backed
abrasives (fig. 2-3)
• User's guide
3. Remove all packing materials and
store in case you ever need to return
the unit for servicing.
4. Visually inspect your tool for poten-
tial damage incurred during ship-
ment. If there is damage, call 800-
597-6170 to speak to a Customer
Service Representative.
5. Your WORK SHARP™ WS2000's
Edge-Vision™ slotted see-through
wheel (fig. 2-1) can be used two
ways. Use it with the Edge-Vision™
Underside Port for sharpening small
carving and lathe tools, screwdrivers,
and other general purpose grinding
tasks. You can also use it with solid
abrasive media for fast and easy top-
side sharpening of putty knives, axes,
and other bladed tools.
6.
To apply the 150mm adhesive-
backed abrasive disks, a clean work
environment is critical. Peel the back-
ing film off the abrasive disk. Handle
the abrasive disk by the outer edges,
being careful not to get any contami-
nants on the adhesive backing. Flex
www.worksharptools.com
Edge-Vision
Slotted Wheel
Top Tool Rest
Abrasives Kit
(standard and slotted)
Fig. 2-1
TM
Fig. 2-2
Fig. 2-3