Tabla de contenido
Idiomas disponibles
Idiomas disponibles
SAFETY and GENERAL INFORMATION
Save these instructions. For your safety, read, understand, and follow the information provided with and on this jack
before using. The owner and operator of this equipment shall have an understanding of this jack and safe operating
procedures before attempting to use. The owner and operator shall be aware that use and repair of this product
may require special skills and knowledge. Instructions and safety information shall be conveyed in the operator's
native language before use of this jack is authorized. If any doubt exists as to the safe and proper use of this jack,
remove from service immediately.
Inspect before each use. Do not use if broken, bent, cracked or damaged parts are noted. Any jack that appears
damaged in any way, or operates abnormally shall be removed from service immediately. If the jack has been or
suspected to have been subjected to a shock load (a load dropped suddenly, unexpectedly upon it), immediately
discontinue use until jack has been checked by a factory authorized service center (contact distributor or manufacturer
for list of authorized service centers). It is recommended that an annual inspection be done by qualified personnel.
Labels and Operator's Manuals are available from manufacturer.
PRODUCT DESCRIPTION
Hydraulic Transmission Jack is designed to be used as an aid in the removal and installation of automotive and
light truck transmissions, transfer cases and transaxles. This telescopic style transmission jack is for use under an
overhead lift or in a garage pit. On air option model 42001, ensure that your air source can dedicate 7.8 CFM @
110-175 psi to each jack operated.
!
NEVER use for any purpose other than those uses outlined above!
SPECIFICATIONS
Model
Capacity
42001
1 Ton
42003
Min. Height
Max. Height
48-5/8"
77-3/8"
Extended Saddle
Saddle Base
13" x 13"
24-1/2" x 18-7/8"
2
Jack Size
Area
42 1/8" x 39-1/2"
Tabla de contenido
