Kenmore 407.83086 Manual De Uso Y Cuidado página 13

REMOTE CONTROL BUl-irONS Cont. (Rg. 9)
6. Auto-on Timer: When the air conditioner
is off, it can be set to automatically turn
on in 30 minutes to 24 hours at the previ-
ous setting. To set the Auto-on Timer;
while the unit is off, point the remote
control toward the air conditioner and
press the TIMER button. Then press the +
or - buttons to adjust the timer setting in
30 minute increments (.5 hours). Once
desired setting is reached, press TIMER
button again. An audio alert will sound,
and the T-ON indicator will stop flashing
to indicate the setting has been saved
and the timer has been activated. To
cancel the auto-on timer, press the TIMER
button again.
Auto-off Timer: When the air conditioner
is on, it can be set to automatically turn
off in 30 minutes to 24 hours. To set the
Auto-off Timer; while the unit is on, point
the remote toward the air conditioner and
press the TIMER button. Then press the +
or - buttons to adjust the timer setting in
30 minute increments (.5 hours). Once
desired setting is reached, press TIMER
button again. An audio alert will sound,
and the T-OFF indicator will stop flashing
to indicate the setting has been saved
and the timer has been activated. To
cancel the auto-off timer, press the TIMER
button again.
(1: 5) Fiq. 10
1)
REMOTE CONTROL DISPLAY(Rg. 10)
7. Auto - Chooses one of the modes below
based on the temperature the air condi-
tioner
senses in the room
8. Cool - Cooling Mode
9. Dry - Dehumidifying Mode
10. Fan - Air circulation mode
11. Speed - Indicates the selected fan speed
12. Lock - Indicates when the remote control
buttons are locked
13. Sleep - Energy saving feature that in-
creases the temperature slightly while in
Cool Mode
14. T-On - Indicates Auto-On Timer is Set
15. T-Off - Indicates Auto-Off Timer is Set
REMOTE CONTROL LOCK
Pressthe + and - buttonssimultaneously to
lock the buttons on the remote control.
When locked, the remote control may not
be used to operate the unit. Pressthe + and
- buttons simultaneously once more to unlock
the remote control.
CHANGE TEMP READING °C & °F
When the unitis powered off, pressthe
MODE and - buttonssimultaneouslyto
change the temperature reading from °F to
°C. Pressthe MODE and - buttons simultane-
ously once more to change the temperature
reading from °C to °F.
INSERTING BATTERIES - The included re-
mote control usestwo AAA batteries.
1) Remove the back cover of the re-
mote control
2) Insert two AAA 1.5V batteries, mak-
ing sure they are in the correct posi-
tion.
3) Replace the cover.
DO NOT mix old and new batteries. DO
NOT mix together Alkaline, Standard
(Carbon-Zinc), or Rechargeable (Nickel-
Cadmium) batteries. Dispose of batteries
properly. DO NOT leave batteries in the
remote if it will not be used for longer than
2 months.
13