Teka IOVEN Manual Del Usuario página 46

IMPORTANT
The cooling process may vary according
to room temperature because of the high
temperatures inside the oven.
7. Once the oven has cooled, an acoustic
signal is heard, the symbol
the door unlocks.
8. Open the oven door and wipe the
inside with a damp cloth, cleaning up the
ash produced during the cleaning cycle.
Hard-to-reach areas in the oven will need to
be cleaned with a non-metal fibre scourer.
9.
Once the oven is clean, do not forget to
replace the runners and accessories.
10. The oven is now ready to be used again.
IMPORTANT
If you have any problems with the program-
ming and use of this feature, consult the
Installation and Maintenance booklet includ-
ed with your oven.
CANCELLING THE PYROLYSIS
Pyrolysis is an automatic function and as
such, can only be activated using the timer
programme. To cancel the pyrolysis the oven
has to be reset, following the instructions below:
1. Press the button.
The pyrolysis will stop.
2. Two situations can arise in relation to the
inside temperature of the oven:
a) Dangerous inside temperature: In this
case, the door will remain locked until the
temperature falls to a safe level. The
symbol will appear on the screen.
46
User's Guide
P2
flashes and
b) Safe inside temperature: If the inside
3. Safe inside temperature: If the inside
temperature of the oven is safe, it will unlock
immediately and the oven will revert to the
standby screen.
When the door is unlocked and can be
opened, the symbol will disappear
and the time will be shown again on the
clock display.
temperature of the oven is safe, it will
unlock immediately.