Tabla de contenido
Idiomas disponibles
Idiomas disponibles
1
.
Assemble leveler plates to bottom of
cabinet. Assemble levelers by
screwing them completely into the
holes in the plates.
3
.
To reposition the top or bottom shelf, first
remove the retaining plugs.
Remove the shelf by placing 2 hands
underneath the shelf and lifting with even
pressure.
Move the shelf to the desired location
making sure all the tabs pass completely
through the shelf locating slots.
Maximum Weight Limits
Shelves: 125 lbs. (56 KG) each
Cabinet: 500 lbs. (225 KG) total
1
3
Drawer Removal
To remove a drawer, pull the drawer completely out,
press down the left tab and lift up the right tab, pull
drawer off slides. To reinstall the drawer, realign with
the internal drawer slide and push in until locked in
place.
Storage Cabinet
INSTRUCTIONS
SGO-372
WARNING
Excessive Weight Hazard
Use two or more people to
move and assemble cabinet.
Failure to do so can result in
back or other injury.
2
.
Locate the cabinet in the desired
location.
Make sure the cabinet is level and
square by rotating down only the
levelers required.
2
Trim Installation
Starting at one end, press the
trim on the drawer handle.
3 13
40176-0912
Tabla de contenido
