Wall Cabinets; Wall Mounting - STACK-ON SGO-1250 Instrucciones De Ensamblaje

1
2
A
1.
Position shelves at desired location and secure with
4 screws each through pegboard sides.
3.

Wall Mounting

The hardware used to secure the cabinet may vary depending on the type of wall and
spacing of wall supports. Please contact your local hardware retailer for fastening
hardware other than what is provided.
These instructions provide a general guideline for hanging the cabinet. Fastening
hardware is included for wood frame wall construction.
The cabinet should be mounted flush and level on the wall. You must use (4) mounting
holes when securing the cabinet to the wall.
TIP: A securely fastened cleat (A) mounted level and at the appropriate height will aid in
mounting the cabinet.
3
Wall Cabinet
INSTRUCTIONS
SGO-1250
WARNING
Excessive Weight Hazard
Use two or more people to
move and assemble cabinet.
Failure to do so can result in
back or other injury.
2.
Magnet Catch Installation
Place the magnetic catches on the inside of the
RIGHT door as shown. Align magnets to top
and bottom door edge and center as shown.
Remove the backing from the tape on both the
top and bottom magnet.
Close the door to secure the magnets to the top
and bottom door stops. The adhesive on the
magnet should secure the magnet to the
cabinet body.
Open the door and press the taped magnets
firmly in place.
Maximum Weight Limits
Shelves: 40 lbs. (18 KG) each
Cabinet: 150 lbs. (67 KG) total
2 13
40176-0912