Complete The Installation - Axis T92A10 Guia De Instalacion

Page 10
24V AC Wiring distances
The following are the recommended maximum distances for 24V AC with a 10% voltage drop. (10%
is generally the maximum allowable voltage drop for AC-powered devices.)
Total vA consumed
40

Complete the installation

7
1. Check that all cables and wires in the housing are properly connected.
2. Connect the AC mains power cable and check that the LEDs on the camera light up according
to the description in the Installation Guide.
3. Secure the Power supply with a wall mounting screw (fig.8).
4. Follow the instructions in the Installation Guide to install the camera on the network.
5. Once the installation is complete and the camera focus has been set, close the lid and tighten
the screws to lock the housing using the supplied hexagonal key.
6. The installation is now complete.
Note:
The Axis network camera installation guide is shipped with the camera or is available from
the Axis web site at www.axis.com
Wire guage
22 20 18
35 44 70
Maximum distance from transformer to housing
AXIS T92A10 Installation Guide
16 14 12 10
112 179 285 452
AWG
Feet