RIB KING 24V Manual Del Usuario página 29

M
ECHANICAL STOPPER ADJUSTMENT
To adjust the stoppers you have to follow the scheme (Fig. 9).
To set the opening limit it's enough to fix the stopper (A) in the needed
position by tightening the 8mA screw with a n. 13 key.
To obtain the desired closing limit you must adjust the stopper (B)
(OPTIONAL) ) in the needed position and tighten it as for stopper (A).
E
MERGENCY RELEASE
To move the gate manually it is necessary to release the operator
inserting the special key and turning it 2 times in the anti-clockwise
sense (Fig. 11).
In order to carry out the manual operation of the gate leaf the followings
must be checked:
- That the gate is endowed with appropriate handles;
- That these appropriate handles are placed so to avoid safety risks for
the operator;
- That the physical effort necessary to move the gate leaf should not be
higher than 225 N, for doors/gates for private dwellings, and, 390N for
doors/gates for commercial and industrial sites ( values indicated in
5.3.5 of the EN 12453 norm).
M
AINTENANCE
To be undertaken only by specialized staff after disconnecting power
supply.
Lubricate the hinges and check the oil level and thrust force generated
by the operator on the gate once a year.
Lubricate the nut screw with silicon grease every two years.
COL
Column attachment
KING 24V
Z
Y
S1
X
S2
S3
ANT
Leaf attachment
KING 24V
A
29
29
45
ANT KING 24V L
Leaf attachment
KING 24V L
B
G
B
9
10
11
C
D
12