Sanus Systems VMPL250 Instrucciones De Montaje página 4

Step 1: Mount Low Profile Monitor Brackets to a television with a flat back
Note: For televisions with a curved back, or an obstruction near the threaded insert see Step 2.
First, determine the diameter of the Bolt (d,e,f,g) your TV requires by hand threading them into the threaded insert on the back of the TV.
If you encounter any resistance stop immediately! Once you have determined the correct diameter, see the appropriate Diagram below.
You will thread the Bolt through the appropriate Lock Washer (l,m,n,o), the corresponding Washer (r,s), the Monitor Bracket (c), and fi-
nally into the TV. Make sure the Monitor Brackets are vertically centered and level with each other. See the appropriate Diagram below.
M4 Diameter Bolt
M5 Diameter Bolt
Note: After completing Step 1, proceed to Step 3.
c
l
r
c
m
r
d
Diagram 1
e
M6 Diameter Bolt
c
s
M8 Diameter Bolt
c
s
f
n
g
o