Sanus Systems VMPL250 Instrucciones De Montaje página 3

Thank you for choosing a Sanus Systems Vision Mount Wall Mount. This product is designed to mount flat panel televisions weighing up to 130 lbs.
only 1.25" off of the wall.
Safety Warning: If you do not understand these directions, or have any doubts about the safety of the installation, please call a qualified contractor or
contact Sanus at 800.359.5520 or www.sanus.com. We can quickly assist you with installation questions and missing or damaged parts. Replacement
parts for Sanus products purchased through authorized dealers will be shipped directly to you. Check carefully to make sure there are no missing or
defective parts. Never use defective parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is
not explicitly specified by Sanus Systems. Sanus Systems can not be liable for damage or injury caused by incorrect mounting, incorrect assembly, or
incorrect use.
Note: The supplied wall mounting hardware is not for steel stud walls or old cinder block walls. If you are uncertain about the nature of your wall,
consult an installation contractor. Sanus makes every effort to assure all necessary television mounting hardware is included. If the hardware you need
is not included please consult your local hardware store or call Sanus Systems.
Required Tools: 3/16 drill bit, 1/2" Masonry Bit for brick concrete or concrete block installations, wrench or socket set, Phillips screw driver.
Supplied Parts: *Not shown as actual size
(1) Wall Plate - a*
(4) M4 x 12 Bolt - d
(4) M4 x 30 Bolt - h
(4) M4 Lock Washer - l
(4) M4/M5 Spacer - p
(6) Lag Bolt - t
Assembly Instructions for Model: VMPL250
(1) Safety Bar - b*
(4) M5 x 12 Bolt - e
(4) M5 x 30 Bolt - i
(4) M5 Lock Washer - m
(4) M6/M8 Spacer - q
(6) Lag Bolt Washer - u
(2) Monitor Bracket - c*
(4) M6 x 12 Bolt - f
(4) M6 x 35 Bolt - j
(4) M6 Lock Washer - n
(8) M4/M5 Washer - r
(6) Concrete Anchor - v
(4) M8 x 16 Bolt - g
(4) M8 x 40 Bolt - k
(4) M8 Lock Washer - o
(4) M6/M8 Washer - s