Tabla de contenido
• Always ON
:Tare is fixed. Press T
key to cancel it when weighing plate
is empty.
TOTAL MEMORY TRANSACTIONS
Total memory is used for adding weight of
products to previous calculated weight. For
this transaction there are two keys W ,
M X on keyboard.
Adding to Total Memory:
o
Place the product; to add to
memory, on the weighing plate.
Wait
until
D
indicator turns ON.
o
Press W key. Weight is added
to memory.
M indicator flashes.
NOTE: During the zero, negatif and Full
weight indications and also when the
D
indicator is off; adding to total memory will
not be operated.
NOTE: After an adding to total memory
transaction, new adding transactions will not
be allowed until weighing plate is empty and
"0.000" value is seen on weight
NOTE: It is possible to see the total as soon
as pressing W key. For this transaction,
turn off "Adding without Showing Total"
(Set3-1) specification from SETTINGS. In
this case, total would be seen until the
product is taken from weighing plate.
NOTE: Maximum 250 record is allowed for
total memory transaction.
Seeing and Erasing Total:
o
Press M X key.
First, "toP
is shown during 2
seconds, then total
weight is seen on
display
during
seconds
o
Press M X key to delete
the total memory or press F to
return to normal weighing mode.
M.
Total indicator is seen as
indicator is;
off
memory is empty.
flashing
memory has value.
on
memory value is
seen.
NOTE: It is possible to see the details of
weighted products that are saved to total
memory by pressing W key. Detailed
explanation can be found in "Seeing the
Memory in Details" part.
Seeing the Memory in Details:
o
Press M X key.
First, "toP
is shown during 2
seconds, then total
weight is seen on
display
during
seconds.
o
Press W key.
First, "tP
shown
during
seconds,
weight
related to the first
transaction is seen
on display during 2
seconds.
o
When
key
is
pressed
W
transactions are seen on display,
respectively.
- 11 -
AG "
o
Press M X key.
2
o
Press M X key to erase
memory or
without erasing.
If total
o
Only
instruments have this feature.
o
,To Enable Silo Mode 12.1 must
be OFF (device not approved) and
than 2.7 must be ON (Silo Mode is
Active)
o
In this mode Initial Zero Setting
Control
shows the same weight value after
turned off and turned on.
o
Zero setting key is not work in this
mode. For zero setting press three
times O key during 3 seconds.
AG "
DISPLAY BACKLIGHT
Press ☼ key to toggle between backlight ON,
OFF and ON_OFF modes. To change
2
backlight mode :
o
Press ☼ key.
1 " is
2
then
bL On
value
bL OFF
bLOnFF
First, "toP
AG "
is shown during 2
seconds, then total
weight is seen on
display
during
2
seconds.
When scale is turned on, backlight mode is
OFF.
F
press
to return
If there will be a flashing point on display
instead of weight value, backlight will be
turned off automatically.
SILO MODE
TEB
series
weighing
An acoustic signal can be given between two
predefined weight values. For using this
feature; min. weight value "Limitation Lower
Limit"(Set4-1)
"Limitation Upper Limit"(Set4-2) should be
registered. After registering the desired
is not done (Error5) It
min/max weight values, "Limitation" (Set4-3)
should
Limitation feature.
Example: Registering the "Limitation Lower
Limit"(Set4-1) value was explained blow.
Suppose that the weight we want to register
is 2 kg. (4: basis menu number, 1: sub menu
number)
For
a
second,
backlight's mode is
seen on display.
: Backlight ON
Backlight
is
continuously ON.
: Backlight OFF.
Backlight
is
continuously OFF.
: Backlight ON_OFF .
- 12 -
Backlight is ON while
weighing or pressing
a key.
Backlight
is
OFF
when there is no
weight
on
the
weighing plate.
LIMITATION
and
max.
weight
value
be
turned
"ON"
for
activating
∗ Press F key during 3 seconds.
"Set 1.1" is seen
on display during 2
seconds,
after
2
seconds value of Set
1-1 is on display
during 2 seconds.
∗ Press F key 3 times. Pass to
basis menu 4 (Limitation).
"Set 4.1" is seen
on display during 2
seconds,
after
2
seconds value of Set
4-1 is on display
during 2 seconds.
Tabla de contenido
