Drive Voyager Pro 18018 Manual Del Usuario página 20

．Remove the mesh nebulizer from the medicine container by turning it
clockwise and drawing it out.
．The nebulizer is later reassembled in the reverse order.
．Finally, clean all the parts again under running water.
Important
Ensure that you do not touch the mesh, as this may destroy it. The mesh
may be rinsed under running water, when necessary, however must be
thoroughly dried; otherwise the mesh may become damaged.
．If any traces of medical solutions or impurities remain on the gold-colored
contacts on the device and nebulizer, use cotton buds to remove them.
．Clean the outside of the mesh and outside of the medicine container
with a cotton bud.
18
First
Second