Electrical Hook-Up - Fulgor Milano FQSO 4505 MT X Manual De Instalación, Uso Y Mantenimiento

ELECTRICAL HOOK-UP

Before connecting to the electricity, make sure that:
- the characteristics of the electrical system satisfy what is shown on the serial number plate applied
to the front of the oven;
- the system has an effective earth connection compliant with current standards and laws.
The earth connection is required by law. The cable must not, at any point, reach a temperature greater
than 50 °C above the ambient temperature.
This oven must be connected to the electricity through a power supply cable and plug that is compatible
with the outlet of the electrical system that powers this oven.
If a fixed appliance does not have a power cord and plug, or another device that ensures disconnection
from the mains, with an opening distance of the contacts that allows complete disconnection under
the conditions of excessive voltage category III, such disconnection devices must be provided in the
power supply mains conforming to the installation rules.
The omnipolar socket or switch must be easy to reach when the appliance is installed.
Note: The manufacturer declines all liability if the usual accident prevention standards and the above
instructions are not followed.
H05RR-F 3x1,5 mm²
H05VV-F 3x1,5 mm²
H05RN-F 3x1,5 mm²
H05V2V2-F 3x1,5 mm²
TYPE AND MINIMUM DIAMETER OF THE CABLES
33
SASO
H05RR-F 3x2,5 mm²
H05VV-F 3x2,5 mm²
H05RN-F 3x2,5 mm²
H05V2V2-F 3x2,5 mm²
GB