Freeman P12IW Manual Del Usuario página 4

OPERATION
INSTALLING/REMOVING BATTERY PACK
To install, simply insert the battery pack and make
sure the latch on the battery snaps in place and
battery pack is secured to the tool.
To remove, depress the latch and pull out the
battery pack.
VARIABLE SPEED SWITCH TRIGGER
The variable speed switch trigger delivers higher
speed with increased trigger pressure and lower
speed with decreased trigger pressure.
To turn on the tool, depress the switch trigger. To
turn it off, release the switch trigger and allow the
anvil to come to a complete stop.
THREE-SPEED SELECTOR
The speed of the impact wrench can be changed for
various applications. Press the selector button to
change to the desired speed.
LOW SPEED (0-1,300 RPM)
MEDIUM SPEED (0-2,000 RPM)
HIGH SPEED (0-2,500 RPM)
WARNING:
Never change the speed while the tool is
running. Doing so may result in serious
damage to the tool.
DIRECTION OF ROTATION SWITCH
(FORWARD/REVERSE/CENTER LOCK)
Set the rotation direction switch in the OFF
(Center lock) position to lock the trigger and help
prevent accidental starting when not in use.
Push the direction of rotation switch to the left of
the trigger for forward operation. Push the switch
to the right to reverse the direction.
The tool will not run unless the direction of
rotation selector is pushed fully to the left or right.
BRUSHLESS BRUSHLESS
MOTOR MOTOR
OFF(CENTER LOCK) FORWARD/REVERSE
06
HTTP://WWW.FREEMANTOOLS.COM
MODEL: P12IW
TRI-BEAM LED LIGHTS
The tri-beam LED lights around the anvil illuminate
when the trigger is depressed. The time-out feature
will automatically shut off the lights when the tool is
not in use.
CHARGING THE BATTERY
1.
To charge the battery, line up the slot of the battery
with the slot of the charger and slide into place.
2. The battery indicator light should turn from green
to red when the battery is charging.
When the indicator light has turned green the
3.
battery should be fully charged.
WARNING:
Allow battery to cool down before
charging if the battery is hot after contin-
uous use.
BATTERY
All batteries wear out over time due to normal wear
and tear. Do not attempt to disassemble and repair
the battery, as this could cause serious burns
especially when wearing rings and jewelry. For the
longest possible battery life, we suggest the
following:
Remove the battery from the charger once
fully charged.
Store the battery away from moisture and at
a temperature below 80°F.
Store the battery with at least a 30% – 50%
charge.
If a battery has been stored for six months
or more, charge the battery as normal.
MAINTENANCE
Avoid using solvents when cleaning plastic parts.
Most plastics are susceptible to damage from various
types of commercial solvents and maybe damaged
by their use. Use clean cloth to remove dirt, dust, oil,
grease, etc.
WARNING:
Remove the battery from the tool for any
inspection, maintenance, and cleaning.
1-888-669-5672
MODEL: P12IW
PGP INC. PRODUCT WARRANTIES
Professional 1-Year Limited Warranty
The Freeman Tool limited warranty extends exclusively to the original purchaser of the Freeman Product,
begins on the date of purchase. During the warranty period Prime Global Products, Inc. (PGP) expressly
warrants that the Freeman Product is free from defect in materials and workmanship subject to the exceptions
and limitations contained herein. PGP shall at its option, repair, replace, or offer a full refund for a Freeman
Product that has a defect in materials or workmanship.
A DATED SALES RECEIPT OR PROOF OF PURCHASE FROM THE ORIGINAL RETAIL PURCHASER IS
REQUIRED TO MAKE A WARRANTY CLAIM. Warranty registration is also required and can be accomplished
through On-Line Product Registration at www.primeglobalproducts.com, select SUPPORT, select PRODUCT
REGISTRATION. To make a warranty claim, the original purchaser must return the Freeman Tool, postage
prepaid and insured, with proof of purchase to PGP or any of its authorized service centers. For questions
please call 1-888-669-5672. Other than the postage and insurance requirement, no charge will be made for
repairs covered by this warranty.
Warranty Exclusions
These Warranties do not apply where:
Repairs or alterations have been made, or attempted, by others, and/or the unauthorized use of
non-conforming parts or accessories.
Repairs are required due to normal wear and tear.
The Tool has been abused, misused, improperly maintained or operated, including: the failure to use
clean, dry, regulated compressed air at the recommended pressure; accidents caused by use of the
Freeman Product after partial failure.
The Freeman Product is used commercially in assembly lines or production lines. The Freeman
Product is intended for use by individuals and these warranties do not extend to such commercial
uses.
NO WARRANTY, ORAL OR WRITTEN, EXPRESSED OR IMPLIED, OTHER THAN THE ABOVE WARRAN-
TIES IS MADE WITH REGARD TO THIS FREEMAN PRODUCT. ANY IMPLIED WARRANTIES WILL BE
LIMITED IN DURATION TO THE APPLICABLE WARRANTY PERIOD SPECIFIED ABOVE. SOME STATES
DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE MAY
NOT APPLY TO YOU. YOUR REMEDIES ARE SOLELY AND EXCLUSIVELY AS STATED ABOVE. PGP
SHALL IN NO EVENT BE LIABLE FOR INCIDENTAL, CONSEQUENTIAL, INDIRECT, OR SPECIAL
DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR
CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU. IN
NO EVENT, WHETHER AS A RESULT OF A BREACH OF CONTRACT, WARRANTY, TORT (INCLUDING
NEGLIGENCE) OR OTHERWISE, SHALL PGP'S LIABILITY EXCEED THE PRICE OF THE PRODUCT
WHICH HAS GIVEN RISE TO THE CLAIM OR LIABILITY. ANY LIABILITY CONNECTED WITH THE USE OF
THIS PRODUCT SHALL TERMINATE UPON THE EXPIRATION OF THE WARRANTY PERIOD SPECIFIED
ABOVE. NO EMPLOYEE OR REPRESENTATION OF PGP, OR ANY DISTRIBUTOR OR DEALER IS
AUTHORIZED TO MAKE ANY CHANGE OR MODIFICATION OF THIS WARRANTY.
These warranties give you specific legal rights. You may also have other rights which vary from state to state.
HTTP://WWW.FREEMANTOOLS.COM
07
1-888-669-5672