SKSC2HE
24
Controller / electrical connections
Note:
- Work on live parts must be carried out by an authorised
specialist!
- Fusing, wiring and earthing must be executed in accor-
dance with the local regulations.
- The electrical connection to the mains network must be
realised using the clamped power cable.
- The solar controller must be protected from surge dam-
age.
- The controller only needs to be opened for service work.
Ensure that the power supply has been disconnected
before opening the solar controller housing!
Pump cables, power cable and tank sensor are connected
to the solar controller ex-works. The collector sensor
must still be connected to the prepared extension.
The connection terminals for the sensor are accessible
once the screw [F] in the solar controller panel [G] is
loosened.
Caution!
Do not severely bend or place the cable under tension!
Do not guide the cable over sharp edged components.
The cable must not come into contact with hot parts!
(For functional description and operation see separate
Controller Manual).
GB