HURAKAN HKN-BCF3 Manual Del Usuario página 50

EN
10.2. Operating cycles of HKN-BCF3L, HKN-BCF5L models
10.2.1. Background information
The device performs the following operating cycles:
➢ Time-adjusted cooling and storage in the above-zero temperature zone;
➢ Time-adjusted cooling and storage in the below-zero temperature zone;
➢ Temperature-adjusted cooling and storage in the above-zero temperature zone;
➢ Temperature-adjusted cooling and storage in the below-zero temperature zone;
To repeat the previous cycle:
➢ press and hold
displayed;
➢ press
time in minutes will be displayed; in case of the temperature-adjusted cooling
cycle, the set temperature will be displayed;
➢ press
another cycle is selected);
➢ press
10.2.2. Time adjustment of the cycle in the above-zero temperature zone
To start the cycle:
➢ make sure that the device is in the stand-by mode;
➢ press
indicator lights up and flashes;
➢ press
➢ press
➢ press
displayed, and
➢ press
➢ press
50
button for 2 sec: the icon of the previous cycle will be
for 60 sec: in case of the time-adjusted cooling cycle, the cooling cycle
or for 15 sec to change values (settings are maintained until
button for 15 sec to activate the cycle.
to select the above-zero temperature mode PoS and make sure that
for 15 sec: the cycle duration in minutes will be displayed;
or for 15 sec to adjust the time;
: the temperature of the cooling limit set point (in C°/F°) will be
indicator lights up;
or for 15 sec to adjust the parameter value;
button for 15 sec to activate the cycle.