Setting The Channel; Vox Function - Olympia PMR 1410 Twinset Manual De Instrucciones

All the walkie-talkies which are within range and are
switched to the same channel receive your message.
appears in the display.
3
If you want to answer a signal received, press the
key and speak into the microphone.
PTT
Scanning the Channels
Before scanning all the channels to receive possible
radio signals within range of your walkie-talkie, en-
sure that the setting in the Subchannel menu is 0F.
1
Press the key. The walkie-talkie scans all
the channels in succession.
2
If you want to retain a channel, press the
key again.
If you want the communicate with others, ensure that
all the relevant walkie-talkies communicating with
each other are using the same subchannel.

Setting the Channel

The walkie-talkies use free channels. The walkie-talk-
ies within range which are set to the same channel
can receive signals. If you do not want to, please
observe the information regarding subchannels,
inferring that third parties can participate in your
communication.
1
Press the key.
2
Use the and
quired channel.
3
Confirm your input by pressing the
Setting the Subchannel (Subcode)
CTCSS Code
In order to enable communication via a subchannel
(CTCSS code), the walkie-talkies communicating
with each other must be set to the same channel and
same subchannel.
appears in the display.
keys to set the re-
key.
PTT
1
Press the key twice.
display.
2
Use the and
required subchannel.
Select the setting 0F if you do not wish to use a
subchannel.
DCS Code
In order to enable communication via a subchannel
(DCS code), the walkie-talkies communicating with
each other must be set to the same channel and
same subchannel.
1
Press the key three times.
the display.
2
Use the and
required subchannel.
Select the setting 0F if you do not wish to use a
subchannel.
Dual Watch
You can use the Dual Watch function when you want
to monitor two channels simultaneously.
1
Press the key four times.
the display.
2
Select the second channel required (in addition
to the current one) using the
keys.
3
Confirm your input by pressing the
4
If the function is switched on,
display continuously. The display shows the
selected channels alternately.

VOX Function

You can use the VOX function when the microphone
appears in the
keys to select the
appears in
keys to select the
appears in
DW
and
key.
PTT
appears in the
DW
15