Diagrams And Safety Explanations - FIXATOR LM Serie Instrucciones De Uso

Check the condition of the cable and its length
(working height + 2m).
Check the condition of the hook and safety latch.
Avoid the formation of loops when unwinding..
The end of the cable should be clean and sharp.
pour votre sécurité, n'utiliser que des câbles
FIXATOR
Put the end stopper on the wire rope (the spring
being directed to the winch). Block with an Allen
key.
Insert the end of the wire rope through the bottom
opening A. press the UP button on the pendant
control while pushing the wire rope so that it
engages in the throat of the pulley.
When the rope come out through hole B, continue
the movement so as to obtain a sufficient length of
wire rope.
A
PS : a second stopper is provided to stop the
descent; position the spring on the side of the
winch:
INSTRUCTION MANUAL
Electrical winches LM+
Check the operation of the limit switches of the
winch.
For your safety, use only FIXATOR cables.
Ensure that the cable above the hoist (taut) does not
touch surfaces or angles.
Ensure that the outgoing winch cable (slack) is free.
Do not let the loaded rope become slack if the load
is not stable, resting on a strong enough support.
2.2
performed by personnel specially trained by the
manufacturer or its dealers, duly authorised by their
employer.
The maximum capacity of the hoist (WLL) should
be the basis for calculations of anchor strength.
B

Diagrams and safety explanations

Installation and use operations must be
Réf : 1813000204
Page : 9/20
Version : 46/18