Nolangroup n-com R Serie Manual De Instrucciones página 10

EN
Fig. 6
ONLY FOR HELMET N100-5 – positioning of wiring and microphone
Positioning the right side wiring and the microphone:
Lift up the plastic lining of the cheek padding (Fig. 7).

Insert the microphone into the eyelet (Fig. 8) and position it in the special housing, then inserting the

metal boom in the groove found in the chin guard coupling frame (Fig. 9).
Caution: make sure that the side of the microphone support with the writing "N-Com" is facing inward.
 Fix the cable inside the helmet and make sure the right fixing clip snaps into its housing (Fig. 10).
 Reposition the plastic lining of the cheek padding, arranging it behind the two small stop hooks (Fig.
11).
Fig. 7
Fig. 9
10
N.B.: For positioning of the keypad in helmets N87
and N100-5, follow the instructions provided in the
dedicated box.
 Fix the cable inside the helmet and make sure
the left fixing clip snaps into its housing.
Hook up the keypad to the helmet by clicking in

the relevant hooks.
Open the rubber cap of the B601 system.

 Reassemble the gasket and secure it with the
specific screw.
Fig. 8
Fig. 10