Alice's Garden SHADO AWM3X2SC Manual Del Usaurio página 27

STEP 3A: INSTALLING ON A SOLID WALL
1. Drill the previously marked holes with a drill and 14mm bit. The holes must be at least 9cm deep.
2. Insert the expansion anchors with a hammer (if necessary)
priate Allen key or an adjustable spanner. This action embeds the anchor into the wall.
3. Once the anchors are fixed in the wall, you can remove the screws.
4. Position the awning brackets
side of the bracket with a notch must be pointing upwards.
≥8cm
5. Repeat this process for the other brackets, once you have checked the brackets are level.
1
≥9cm
Drilled holes Ø14mm
4
3
A
When they are fully inserted, the brackets must be held firm in the wall.
30/09/2019
2
and screw the screws back in, without forgetting the washers. The
2
A
Anchor Ø14mm
5
2
If they move, tighten them further.
A
and tighten the screw using the appro-
3
2
A
EN
2
27