Ki Mobility AXIOM CS Manual De Instrucciones Y Garantía página 17

VI. HARDWARE AND INSTALLATION
C. Removal and Reinstallation of Seating From Frame
When seat to back bracket is installed on seating system.
1. Loosen all knobs on seat and back. See Fig. 7 for the visual steps.
2. Remove optional tethered transit pin if applicable.
3. Lift the seat and back in an upward motion to clear attaching hooks from hardware. Hold the
back, at the top, and the seat, at the front edge, while lifting.
4. Remove seating.
NOTE: To reinstall, go through the removal installation instructions in reverse.
Fig. 7
Seat and Backrest Installed
Loosen Knobs
Remove Pin (if present) Lift Back and Seat Up
15