Hardware And Installation; Transit 2 Point Knob Hardware Package - Ki Mobility AXIOM CS Manual De Instrucciones Y Garantía

VI. HARDWARE AND INSTALLATION
A. Transit 2 Point Knob Hardware Package
Fig. 1
• Left and right corresponding seat and back mount brackets with hardware for quick
removal of the seating system from the chair.
• An optional tethered transit pin for added securement.
• Adjustable cane clamps that are to be installed to the chair frame permanently.
• Seat to Back Hinge keeps the back and seat connected.
• Seat Tabs give proper support while the rear of the seat rests on the canes.
NOTE: Standard cane size is 1".
NOTE: Seat to Back Bracket and Seat Tabs are only available in 2 Point Hardware.
Assembly
NOTE: Use 3/16 and 5/32 T-Handles to install hardware. Do not overtighten screws.
A. 1/4-20 x 3/4 Button Head Screws & 1/4-20 Flat
Washers
C. Seat Tab
Hinged Seat
to Back
Bracket
Seat Tab
Fig. 2
A
Pinned
L-Bracket (2)
A
D
C
B. 1/4-20 x 1 1/4 Socket Head Screws
D. 1/4-20 x 1/2 Socket Head Screws & 1/4-20 Nylon
Nuts
11
Knob Cane
Mount (2)
B