Ki Mobility AXIOM CS Manual De Instrucciones Y Garantía página 15

VI. HARDWARE AND INSTALLATION
Mounting Instructions
1. To mount the hardware to the canes, loosen the socket head screws (Fig. 2 & 4:B).
2. Position the hardware at the desired location and tighten mount into position.
3. If angle adjustment is needed, loosen socket head screws (Fig. 2:D & Fig. 4:C). Set to the
desired angle and retighten.
4. In order for the L-Bracket to be flush with the back, poke/burn holes through the fabric and
mount the button head screws (Fig. 2 & 4:A) to the back.
NOTE: To mount the hardware to a seat base, follow the same mounting instructions
mentioned above.
Fig. 5
2 Point Knob Hardware 4 Point Knob Hardware
13