Veridian Healthcare 09-332 Instrucciones página 9

TAKING YOUR MEASUREMENT
6. For temple measurements, gently place the probe in
the center of the temple area between the end of the
eyebrow and the hairline. Maintain firm contact with
the skin, hold the thermometer in place during the
reading and do not move the thermometer to ensure
reliable results, Fig 4.
For underarm measurements, place the thermometer
probe in the center of the armpit, Fig 5. Press the probe
in an upward motion into the armpit. Leave the
patient's arm raised until the measurement is
complete.
7. The measurement will start automatically once the
probe is in place and will take approximately 4 seconds.
A running circle will appear on the display indicating
the reading is in progress, Fig 6.
8. The unit will sound one long beep when the
measurement is complete and the reading will appear
on the display, Fig 7.
If the measurement is 100.4°F(38°C) or higher, the unit
will emit 11 beeps, indicating a fever is present.
9. To turn the unit off, simply press the
The unit will automatically shut-off after approximately
one minute.
POWER button.
Fig 4
Fig 5
Fig 6
Fig 7
ENGLISH • 9