Reset/Pairing - GN Netcom Jabra M5390 Manual De Usuario

9. Reset/Pairing

9.1
9.2
9.3
3 feet/1m
Note: The headset is already paired with the base unit from the factory. Pairing should only be necessary if
1)
a new headset is required to work with an existing base unit (or vice versa).
~ 3 sec.
~ 3 sec.
9.1 At start-up, press the Answer/
End button down for three seconds.
Alternatively, remove the snap-on
cover and press the reset button
on the headset for three seconds.
The visual indicator on the head-
set will turn to steady blue.
9.2 Then press the reset button
on the base unit for 3 seconds.
The visual indicator on the base
unit will turn steady to blue.
9.3 Make sure headset and
the base are within 3 feet/1m
of eachother. When pairing is
successful,both visual indicators
will fl ashblue 5 times, and the
visual indicator on the base unit
will turn to steady green.
In order to clear the pairing list
in the base, press and hold the
reset button underneath the base
for 5 seconds. In order to clear
the pairing list in the headset,
press and hold the reset button
on the headset for 5 seconds.
Note that after resetting, a new
pairing sequence has to be set up.
1)
15