Dog trace GPS X30 Manual Del Usuario página 47

Setting the BEEPER feature:
The BEEPER feature must be set correctly before hunting commences.
1. Long press the MENU push button, select
holding the MENU push button.
2. Select the transmitter (collar) for which you wish to set BEEPER. Long press the
MENU push button.
3. Select the parameter you wish to set by using
pressing and holding the MENU push button.
4. Use the arrows
above, press .
5. When the BEEPER is fully set, return to the main screen by pressing repeatedly
Setting mode –
We may select 7 modes:
Mode
Description
No.
WARNING: The acoustic and vibration indication may be set up for up to 4 dogs.
When the sound and vibration indication is set, individual dogs may be identified
by the number of beeps/vibrations (max. of 4 beeps or vibrations) indicating dog
at motion/standstill. If the acoustic and vibration indication is set for more dogs,
the acoustic and vibration indication are simultaneous.
Mode 3 and 4 are intended for hunting wild boars. The indication (acoustic or
vibration) is activated if the dog moves within the radius r, for the duration t (time).
Setting of sensitivity –
The sensitivity setting for Mode 0, 1, 2, 5 and 6 is used for more accurate resolution
of the dog at motion/standstill.
S-1: Lowest sensitivity – assessment of standstill status may include dog's slight
movement.
S-9: High sensitivity – for assessment of standstill status dog must be at absolute
rest.
/ to select the required value or mode. To return to the level
Indication
Motion
Beeper flashes Beeper flashes
-
-
-
-
Acoustic
Vibration
and confirm by pressing and
/ arrows and confirm by
Type of hunt
Standstill
Acoustic Bird hunting
Vibration Bird hunting
Acoustic Hunting wild boars
Vibration Hunting wild boars
-
-
.
-
-
-
47