Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Selio ECO
By default, your handset name and number are displayed on the idle screen. You can
change this display.
For this purpose, press and hold down the key
displayed on the screen.
To return to the previous display, press and hold down the key
Place the handset in the base station to charge for 15 hours prior to first use. if you don't
properly charge the phone, batteries performance will be compromised.
9.
Plug one end of the telephone line cord into the modular wall phone jack and the other end
into the jack on the base.
10. After charging, press
Only use the supplied power adapter, connect it to the base socket according to the
installation instructions provided in this booklet and the indications on the identification
label affixed to it (voltage, current, electric network frequency). As a safety measure,
you can use the power adaptors to cut off the 230V current in case of danger. They
must be
2.3.
Handset keys
Screen
Access to dialled number
Access to menu / Validate
Talk on
Handsfree
Recall/Flash
Access to voice messaging
service (Press and hold) *
Activate, deactivate keypad lock
(Press and hold)
Microphone
*
The voice mail number can be programmed. To change it, refer to « Assign a shortcut »
page 9.
key, you can hear dial tone.
located near to the device, and must be easily accessible.
ghi
pqrs
: The current time and date are
abc
def
jkl
mno
tuv
wxyz
#
- 3 -
.
Earpiece
Navigation key up /
Access the caller list
Mute the microphone /
Correction / Cancel
Talk off /
Switch handset on/off
Access to phonebook /
Navigation key down
Internal call
Deactivate handset ringer
(Press and hold)
Tabla de contenido
