Power Management - Dell Latitude 7310 Configuración Y Especificaciones

Table 35. System setup options—Performance menu
Performance
Intel Hyper-Threading Technology
Intel SpeedStep
Intel TurboBoost Technology
Multi-Core Support
Enable C-State Control
Table 36. System setup options—Power Management menu

Power Management

Wake on AC
Auto on Time
Battery Charge Configuration
Enable Advanced Battery Charge
Configuration
Block Sleep
Enable USB Wake Support
Enable Intel Speed Shift Technology
Lid Switch
34 System Setup (Configuración del sistema)
Enables or disables the Intel Hyper-Threading Technology to use processor resources
more efficiently.
Default: ON.
Enables or disables the Intel SpeedStep Technology to dynamically adjust processor
voltage and core frequency, decreasing average power consumption and heat
production.
Default: ON.
Enabled or disabled the Intel TurboBoost mode of the processor. If enabled, the Intel
TurboBoost driver increases the performance of the CPU or graphics processor.
Default: ON.
Changes the number of CPU cores available to the operating system. The default
value is set to the maximum number of cores.
Default: All Cores.
Enables or disables the CPU's ability to enter and exit low-power states.
Default: ON.
Enables the computer to turn on and go to boot when AC power is supplied to the
computer.
Default: OFF.
Enables the computer to automatically power on for defined days and times.
Default: Disabled. The system will not automatically power up.
Enables the computer to run on battery during power usage hours. Use the below
options to prevent AC power usage between certain times of each day.
Default: Adaptive. Battery settings are adaptively optimized based on your typical
battery usage pattern.
Enables Advanced Battery Charge Configuration from the beginning of the day to a
specified work period. Advanced Battery Charged maximizes battery health while still
supporting heavy use during the work day.
Default: OFF.
Blocks the computer from entering Sleep (S3) mode in the operating system.
Default: OFF.
NOTE: If enabled, the computer will not go to sleep, Intel Rapid Start will
be disabled automatically, and the operating system power option will be
blank if it was set to Sleep.
Enables the USB devices to wake the computer from Standby mode.
Default: OFF.
Enables or disables Intel Speed Shift Technology support which enables the operating
system to select the appropriate processor performance automatically.
Default: ON.
Enables the computer to power up from the off state whenever the lid is opened.
Default: ON.