Volume Setting - Shark SHARKTOOTH Guia De Puesta En Funcionamiento

The call will be answered. Audio will be on the headset.
(See VOX Activation / Deactivation on section H.)
You also have the option to answer the call normally by
pressing the MFB (1) for 1 second (1st beep).
End a Call:
Press the MFB (1) for 1 second to end the call (1st beep).
Voice Dial:
Note: Before using this feature, make sure that the voice
dialing function of your phone is activated. Some phones
need to have at least one voice tag recorded in the pho-
ne's memory, not on the SIM card! (Kindly refer to your
phone's manual.)
1. Press the MFB (1) button for 1 second.
2. A beep will be heard on the headset prompting you
to say the voice tag of the contact to call and the Status
Indicator (2) will turn steady blue.
3. Say the voice tag exactly as how you recorded it.
4. The voice tag will be played back to you and then the
phone will dial the number automatically.
Reject a Call:
Assuming the VOX is activated: Reject a call by being
silent for 10 seconds. The call will automatically be rejec-
ted. (See VOX Activation / Deactivation on section H.)

Volume Setting:

Press the Volume Up (3) or Down (4) button repeatedly
until the desired level is reached. A beep will be heard as
lowest and highest levels are reached.
Reconnection to a paired device:
You can reconnect to the last used device by pressing
the MFB (1) button. If you want to reconnect to another
paired device, please use its Bluetooth menu.
2) Intercom Mode:
Start an Intercom Conversation:
Long press the MFB (1) for about 3 seconds until 2nd
beep will be heard. SHARKTOOTH SHARK will connect to
Intercom. Both headsets are now connected. Full duplex
conversations can be made.
E
nglish