Shark SHARKTOOTH Guia De Puesta En Funcionamiento página 18

1. From OFF, press and hold the MFB (1) button until the
Status Indicator (2) turns blinking red/blue. The Headset
is now in pairing mode.
2. While the headset is in pairing mode, access the Blue-
tooth menu of your phone. Turn on the Bluetooth function
then execute a Bluetooth search.
(See your phone's manual).
3. When the phone displays the list of Bluetooth devices,
select ST SHARK.
4. If the phone asks for the password/pin code,
enter 0000 and press OK.
5. The headset is now ready to use.
2) Pairing Procedure for Intercom
(between 2 SHARKTOOTH SHARK devices):
1. Prepare two SHARKTOOTH SHARK. Note: Make sure to
switch off the phones paired to these two headsets.
2. Set the two units to pairing mode (from off, press and
hold the MFB (1) of the SHARKTOOTH SHARK until the
Status Indicator (2) turns blinking red/blue).
3. When the two are set to pairing mode, short press the
MFB (1) of one of the two units (this unit blinks now red/
blue fast). Pairing is successful if the Status Indicator (2)
of the two units is steady blue. Both headsets are now
connected. Full duplex conversations can be made.
3) Pairing Procedure for GPS Navigator:
1. From OFF, press and hold the MFB (1) button until the
Status Indicator (2) turns blinking red/blue. The Headset is
now in pairing mode.
2. While the headset is in pairing mode, access the Blue-
tooth menu of your GPS navigator device. Turn on the
Bluetooth function then execute a Bluetooth search. (See
your GPS navigator's manual for further information and
settings).
F. BAsic oPERAtion:
1) Handsfree Phone Mode:
Answer a Call:
Assuming the VOX is activated: Accept a call by loudly
saying a word within 10 seconds. (Example: When you
receive the ring tone, Say loudly "Ok!")