GE AHE18 Manual Del Propietario Y Instrucciones De Instalación página 13

Installation Instructions
5. PREPARE THE WINDOW AND
INSTALL THE CASE (continues)
CAUTION
H.
To prevent broken glass or
damage to windows, on vinyl
or other similarly constructed
windows, attach the window
locking bracket to the
I. Cut the foam top window gasket to the window
width.
J.
Stuff the foam
between the glass and
the window to prevent
air and insects from
getting into the room.
NOTE: If the gasket supplied does not fit your
window, obtain appropriate material locally to
provide a proper installation seal.
6. INSTALL THE AIR CONDITIONER
IN THE CASE
A. Slide the air conditioner into the case by
the base pan. Do not push on the controls, foam
air discharge housing or the finned coils. Make
sure the air conditioner is firmly seated.
49-7795
6. INSTALL THE AIR CONDITIONER
B.
Vinyl
Wood
C.
D.
E. Replace the screws.
Do not press on
these areas—
damage to the unit
F. Install the filter and the front grille.
may result
G. Plug in the air conditioner.
IN THE CASE (continues)
Replace the 1 screw removed earlier, one
on each side of the case.
Reinstall the control to the panel housing by
replacing the 2 screws you removed earlier.
Install Screws
Attach the front grille to the case by inserting the
tabs on the grille into the slots on the front top of
the case. Push the grille in.
13