KitchenAid KDFE454CSS Instrucciones Para El Usuario página 12

Silverware Basket
Use the slots in the covers to
keep your silverware separated
for optimum wash. There are
specially designed slots (small
round holes) for chopsticks. Mix
silverware types to keep them
separated. Load knives down,
forks up, and alternate spoons,
for best cleaning results.
NOTE: If your
silverware
does not fit
into the
designated
slots, flip the
covers up and
push them
down into the
basket.
®
CULINARY CADDY Utensil Basket
Use the utensil basket to hold
specialty cooking utensils (serving
spoons, spatulas, and similar items),
or overflow silverware items.
The basket hangs on the bottom rack
in the right-hand corner. Load the
basket while it is on the bottom rack or
remove the basket for loading on a
counter or table.
NOTE: Spin the spray arms. Be sure
items in the basket do not stop the
rotation of the spray arms.
SURE-HOLD ® Cup and Stemware Holder
Fold down the extra shelf on the left-hand or right-hand side of the
mid level rack to hold additional cups, stemware or long items such
as utensils and spatulas.
NOTE: Remove the culinary tool basket(s) when washing tall
stemware or other tall items in the top rack.
12
FLEXI-FOLD DOWN™ Flexible Tines
The row of tines on the left-
hand and right-hand sides
of the top rack can be
adjusted to make room for
a variety of dishes.
To adjust the fold-down
tines:
1. Grasp the tip of the tine
that is in the tine holder.
2. Gently push the tine out
of the holder.
3. Lay the tines down,
toward the center of the
rack.
NOTE: The bottom rack may also have 1 or 2 rows of flexible tines
located in the back of the rack. Follow the same instructions to
adjust.
®
SURE-HOLD Light Item Clips
The light item clips hold lightweight plastic items
such as cups, lids, or bowls in place during
washing.
To move a clip:
1. Pull the clip up and off the tine.
2. Reposition the clip on another tine.
Premium Adjustable 2-Position Top Rack
After removing the culinary tool rack, you can raise or lower the top
rack to fit tall items in either the top or bottom rack. Adjusters are
located on each side of the top rack. Each adjuster has 2 preset
positions.
To raise the rack, press both rack adjusters and lift the rack until it
is in the Up position and level.
To lower the rack,
press both rack
adjusters and
slide the rack to
its Down position
and level.
Removable Top Rack (for SatinGlide
The removable top rack allows you to wash larger items such as
pots, roasters, and cookie sheets in the bottom rack.
IMPORTANT: Remove dishes prior to removing the top rack from
dishwasher.
To remove the rack
To gain access to the track stops, pull the upper rack forward
about halfway out of the tub.
To open, flip the track stop toward the outside of the tub.
After opening both track stops, pull top rack out of the rails.
Track stop closed
rails)
®
Track stop open