Bulb Changing - Kenmore 116.21714 Manual De Uso Y Cuidado

BULB CHANGING
WARNING
Electrical Shack Or Personal Injury
Hazard
Turn off and unplug vacuum cleaner
before performing maintenance to the
vacuum cleaner. Failure to do so could
result in electrical shock or personal
injury from the vacuum cleaner
suddenly starting.
c uTio.
Do not plug in or turn on until the vacuum
NOTE: Use replacement bulb number
20-5248, see part number detail in
REPLACEMENT PARTS (page 5).
1. Turn off and unplug vacuum cleaner
from electrical outlet.
FSaf
Screwdriver
Slots
ght
Lens
'2. Pry light
lens out at
slots as shown
on both sides.
Rotate lens up
and lift off.
3. Remove the
light bulb by
pulling straight
out.
_ CAUTION
Do not use a bulb rated over 9W
(13V). During extended use, heat from
the bulb could overheat surrounding
plastic parts.
4. To replace the
light bulb, carefully
insert fully into slot.
5. To replace light
lens, place tab at
front of lens into slot.
6. Rotate lens down
and firmly snap into
place.
- 26 -