Light Bulb Replacement - Kenmore 116.36622 Manual Del Propietário

IbWARNING
Electrical Shock Or Personal Injury
Hazard
Disconnect electrical supply before
performing maintenance to the unit.
Failure to do so could result in
electrical shock or personal injury
from the vacuum cleaner suddenly
starting.
TO REMOVE LIGHT BULB
1. Disconnect power cord from electrical
outlet.
Flat
2. Press handle
release pedal
and lay vacuum
cleaner back.
3. Pry light lens
out at slots as
shown on both
sides. Rotate
lens up and lift
_eadfight off.
Lens
CAUTION
Do not use a bulb rated over 9W (13V).
During extended use, heat from the
bulb could overheat surrounding plas-
tic parts.
4. Remove the light bulb
by pulling straight out.
5. To replace the light
bulb carefully insert
fully into slot.
Note: See PARTS AND FEATURES for
bulb number.
I&O.OT,O. I
Do not plug in or turn on until the vacu- I
um cleaner is completely reassembled, I
6. To replace light lens, _q,_://
place tab at front of lens _-_lk',
into slot. Rotate lens
down and firmly snap into
place.
20