Tabla de contenido
Assembly Plan
Fig. 19
x2
Fig. 19a
(2)
1-1/2'' deck screws
per joint
2-1/2''
2-1/2''
(1)Diamond Cut Roof Support Top
(1)Diamond Cut Roof Support Bottom
[PF 3665]
(2)
2-1/2'' screws
2'' x 2'' x 24''
per joint
1-3/4'' Offset
(2)
All Four Corners
2-1/2'' screws
per joint
Fig. 19b
(2)
2-1/2'' screws
per joint
Fig. 19c
Secure roof to uprights by
inserting hardware
through gap in brackets
(3)
2-1/2'' screws
per joint
3/4'' Pan Head Screw
3/4'' Pan Head screw
1-1/2'' screw
2-1/2'' screw
Roof Assembly.
1. Assemble (2) Roof A-Frames as shown in (Fig. 19). Supports should be offset 2-1/2'' per side as shown.
2. Connect (2) Roof A-Frames together as shown in (Fig. 19a).
3. Attach Tarp to Roof Frame as shown in (Fig. 19b).
4. Attach Roof Assembly to unit as shown in (Fig. 19c).
26
Tabla de contenido
