Tabla De Contenido - IVAC Pro Guía Del Usario

Introduction
This User Guide covers the General Description, Features and
Programming of the 'iVAC Pro Switch'. The 'iVAC Pro Switch'
is the module within the 'iVAC Pro System' that is used to
control the dust collector and turn it on or off. It works in
conjunction with an iVAC Pro Tool Plus, Pro Tool, or Pro
Remote and receives digital wireless commands instructing it
to turn the dust collector on or off. There are three variants of
the 'iVAC Pro Switch' that can directly control dust collectors
from 1 to 2 HP (sec 3.0.). For dust collectors greater than 2HP
the 'iVAC Contactor' is required.
Table of Contents
1 Warnings.
2 Physical features
General description of 'iVAC Pro System'
3
4 iVAC Pro Switch
4.1 Modes of Operation
4.2 System Address
4.3 Turn On Delay