Idiomas disponibles
Idiomas disponibles
4.4 Turn Off Time
The Turn Off time is to allow the dust collection system to continue to
run after a power tool has been turned off. This feature is to clear up
any remaining debris at the power tool and in the ducting and may also
be used to avoid quick cycling of the dust collection system.
The Turn Off time can be set by means of the Program Switch to 0
seconds, 5 seconds, 15 seconds or 45 seconds.
Note. If the Turn Off time is set at 0 seconds, the Turn On delay is also
set to 0 seconds.
Turn Off Time Programming.
All switches shown in Off position.
Time
5 Seconds
15 Seconds
45 Seconds
0 Seconds
S5
S6
Off
Off
On
Off
Off
On
On
On
Capítulos
