Features and Controls
KNOW
YOUR
PRESSURE
WASHER
Read this owner's manual
and safety rules
before
operating
your pressure
washer.
Compare the illustrations with your pressure washer to familiarize yourself with the locations of various controls
and
adjustments. Savethis manual for future reference.
Nozzle Extension with
Quick Connect
Spray Gun
Tank
Throttle Lever
Choke Lever
Fuel Valve
Recoil Starter
Run/Stop Switch
(on front of engine)
Air Filter
High Pressure Hose
Oil Fill Cap
Pressure
Control Knob
Quick Connec_ Spray Tips
Pump equipped with
Automatic Cool Down System
Chemical Injection Siphon/Filter
Air Filter -- Protects engine by filtering dust and debris out
of intake air.
Automatic
Cool Down System -- Cycles water through
pump when water reaches 125°-155°F. Warm water will
discharge from pump onto ground. This system prevents
internal pump damage.
Chemical
Injection
Siphon/Filter
-- Used to siphon
detergent or other pressure washer chemicals into the low
pressure stream.
Choke
Lever--
Prepares a cold engine for starting.
Fuel Tank -- Fill tank with recommended fuel.
High Pressure Hose -- Connect one end to the water
pump and the other end to the spray gun.
High Pressure Outlet
with Quick Connect--
To connect
high pressure hose.
High Pressure Outlet
with Quick Connect
Water Inlet
Nozzle
Extension with Quick Connect -- Permits easy
switching between five different spray tips.
Oil Fill Cap --
Fill engine with oil here.
Pressure Control
Knob -- Varies pressure of high pressure
spray.
Pump -- Develops high pressure.
Recoil Starter
-- Use for starting the engine manually.
Run/Stop
Switch --
Set this switch to "Run" before using
recoil starter. Set switch to "Stop"
to switch off engine.
Spray Gun -- Controls the application of water onto
cleaning surface with trigger device, includessafety latch.
Quick Connect
Spray Tips -- Chemical injection, 0°, 15°,
25 ° , and 40°: for various cleaning applications.
Throttle
Lever--Sets
engine in starting mode for recoil
starter.
Water
Inlet
--
Connect
garden hose here.