Emptying The Dirty Water Tank - Hoover ONE PWR SYSTEM FLOORMATE JET Manual De Instrucciones

EMPTYING THE DIRTY WATER TANK

NOTE
When full, the float in the dirty water tank will rise and there will be an audible change in the operating sound. Empty the dirty water tank promptly.
Continuing to clean with a full tank may impact performance.
1
To remove the tank, press down
on the release latch on the front
of the tank and pull the tank
away from the unit.
TIPS Use for picking up small liquid spills (one gallon or less, never to exceed 1/8" in depth).
When vacuuming liquid, make sure the product does not get submerged or doused in liquid, which could cause shock, product failure, or personal injury.
10
2 3
Grasp the lid by the grips Empty the tank and rinse.
and lift.
4 5
Rinse debris from the tank lid Replace lid and install tank into
and float screen. Keep the filter body by aligning the bottom of
on the lid dry while cleaning for the tank and pushing back into
optimal performance. the cleaner until it clicks.