Basic Operation; Setting The Print Position; How To Use The Paper Guides - Fujitsu fi-412PR Guia Del Usuario

3. Basic Operation

3.1. Setting The Print Position

To position the print cartridge for printing:
1. Open the Print Cartridge Cover.
2. Hold the print cartridge holder, as below, and
slide it to the left or right within the document
width to set it at a suitable print starting position.
● The small "▲" protruding from the upper right
HINT
hand side of the print cartridge tray handle
indicates the current print position on the
page.
● Above the print cartridge tray are document
size markings; please use them to adjust for
paper size and printing position.
● Put the actual document in the ADF and
confirm that the print cartridge is positioned
within the document's width.

3.2. How to Use the Paper Guides

Use the Paper Guides to prevent against paper jams due to
curling of the edges, as shown below.
Feed direction
Place the Paper Guides at the ends where the paper edges
will pass through.
1. Insert the document in the scanner.
2. Open the Print Cartridge Cover.
3. Slide the Paper Guides to the left and right of the
page edges.
Paper Guide
When you wish to print on the near the edges of
HINT
a wide width paper, remove the Paper Guide in
order to open space for the Print Cartridge, and
attach it at the center.
For Right Side Edge Printing
For Left Side Edge Printing
Be careful not to let the Paper Guide touch or
ATTENTION
catch onto the print circuit film.
fi-412PR Imprinter Operator's Guide | 9