Resetting Chain Counter; Automatic Lowering Of Anchor - Vetus CCM Manual De Manejo Y Instrucciones De Instalación

7.2 Resetting the chain counter (to 0)
There are 2 methods of resetting the chain counter.
Method 1:
Press the 'ON' and 'UP' keys simultaneously for at least 3 seconds.
Method 2:
Use the function 'reset measurement' in the menu (see 5.1.1).
7.3 Automatic lowering of the anchor
This function must be activated in order to use it (see 5.2.2).
Automatic lowering of the anchor:
Press the 'ON' and 'DOWN' keys simultaneously for at least 3 seconds. The preset length
of chain will be paid out.
For safety reasons it is always possible to interrupt the automatic lowering of the
anchor by pressing any one of the keys.
28
060123.01
Control panel / chain counter CCM