Tabla de contenido
6. Unit Maintenance
6.1 Cleaning the Optical Sensors
It is important to clean all of the sensors in the unit to avoid any paper particles
or dust from sticking to the sensors. This should be done everyday if possible.
The glass surfaces of the sensors may be wiped with a soft cloth soaked with
alcohol (refer picture below).
6.2 Cleaning the Inside of the Machine Periodically
It is necessary to clean the inside of the machine once a week or when needed.
Unplug the machine and open the stacker. Use compressed air, such as
AccuClean to lightly blow out dust from the interior.
6.3 Additional Recommendations
Avoid operating the machine
in a dusty or dirty room.
1. Hopper Sensor
2. Counting Sensors
3. Stacker Sensors
1
2
3
18
Tabla de contenido
